سبد خرید سبد خرید         بهترین حالت نمایش   مرورگر فایرفاکس   مرورگر گوگل کروم

نکته 1: تنها بخش کوچکی از آرشیو نرم افزاری ما در این فروشگاه عرضه شده است، جهت مشاهده لیست کامل نرم افزارها اینجا کلیک کنید.
نکته 2: چنانچه حین خرید با مشکلی مواجه شدید با پشتیبانی ما به شماره 09125156730 تماس بگیرید.

نکته 3: کلیه سفارشهایی که از تاریخ 1402/12/27 لغایت 1403/01/13 ثبت می گردد، از روز 14 فروردین ارسال می گردد. پشتیبانی واتساپ ما در این مدت همچنان فعال است و امکان سفارش و دریافت لینک دانلود نرم افزارها و پکیج های آموزشی وجود دارد.

نرم افزار S5+S7 for Windows V7.3.3 (کد محصول: 0088)

امتیاز:

  • توضیحات محصول

    نرم افزار S5+S7 for Windows V7.3.3 در واقع یک نسخه ترکیبی از دو نرم افزار S7 for Windows و S5 for Windows ساخت شرکت IBHsoftech می باشد که شامل تمام ویژگی های هر دو ابزار در یک برنامه می باشد. با این نرم افزار می توان برنامه نویسی هر دو خانواده S5 و S7 را در محیطی کاربرپسند و قدرتمند انجام داد. بخصوص در مورد سری S5 با توجه به اینکه این سری توسط نرم افزارهای Simatic Manager و TIA Portal پشتیبانی نمی شود، این نرم افزار می تواند بسیار کارگشا باشد. نرم افزاری که خود شرکت زیمنس برای برای برنامه نویسی PLCهای S5 ارائه نموده است بسیار قدیمی است و دارای محیطی تحت DOS می باشد. لذا این نرم افزار بهترین گزینه برای برنامه نویسی این PLCها به شمار می رود.

    این نرم افزار با License Generator اختصاصی اتوسیستم ارائه می گردد. لازم به ذکر است که قیمت لایسنس اصلی این نرم افزار 990 یورو می باشد. در ادامه به معرفی بخش S5 این نرم افزار می پردازیم. لطفا جهت اطلاعات بیشتر به سایت سازنده مراجعه فرمایید.

    نرم افزار S5 for Windows ابزار مورد نیاز برای ایجاد، اصلاح، تست و مستند سازی برنامه ها برای کنترل کننده های منطقی قابل برنامه ریزی خانواده SIMATIC S5 یا STEP5 را فراهم می کند. امکان برنامه نویسی به زیانهای LAD, FBD و STL برای PLC های S5 وجود دارد. برنامه های S5 موجود که با برنامه اصلی زیمنس نوشته شده اند را می توان به طور مستقیم بدون Import/Export کردن ویرایش نمود. S5 for Windows سازگار با واحد برنامه نویسی اصلی زیمنس است. برای عیب یابی خودکار، توابع S5 Doctor نیز یکپارچه می شوند.

    یک ویرایشگر راحت برای ایجاد و ویرایش Symbolic Tables در این نرم افزار قرار داده شده است. جستجو و جایگزینی برای هر معیار و همچنین بازخوانی ممکن است. یک چک کننده syntax نیز با نرم افزار یکپارچه شده است. ویرایشگر جدید چند بخشی، به کاربر اجاز می دهد که statement lists، نمودارهای FBD و نمودارهای نردبانی به راحتی اجاد نماید. در طراحی نرم افزار، تمرکز بر سهولت استفاده با ماوس و یا صفحه کلید تنظیم شده است. Cross references ها و/یا فایل های سمبول مربوطه با آدرس های صحیح نشان داده شده است. در این پنجره فایل سمبول را می توان به طور همزمان ویرایش کرد. تخصیص آدرس های جدید با چک syntax یکپارچه شده است. Statement listsها به راحتی توسط ویرایشگر یکپارچه ایجاد می شود. کلیپ بورد ویندوز را می توان برای هر برنامه یا تنظیمات در هر مکانی استفاده کرد. Statement listsها را می توان به نمودارهای FBD یا نمودارهای نردبانی تغییر داد، تا آنجا که آنها قابل نمایش هستند. نمایش نمودارهای FBD و نمودارهای نردبانی در قالب Statement lists همیشه امکان پذیر است.

     

  • تصاویر نرم افزار

     

  • توضیحات انگلیسی نرم افزار

    New in Version 7:

    • OsziCam®
    • Statusrecorder
    • LogView
    • Intelligent Input Assistance
    • Online to a SIMATIC S5 via SINEC L2
    • Online to a SIMATIC S5 via H1
    • Calling of the STEP5 COM packages on Windows XP (32/64 Bit) Windows Vista (32/64 Bit) Windows 7 (32/64 Bit) Windows 8 (32/64 Bit) Windows 10 (32/64 Bit

    The combined version of S5 for Windows® and S7 for Windows® contains all functionalities of both tools in one application.

     

    S5 programing

    S5 for Windows® provides the tools for creating, modifying, testing and documenting programs for programmable logic controllers (PLC). S5 for Windows® is designed for programming the Siemens PLC family SIMATIC S5 with STEP5. The Function Block Diagram (FBD), the Ladder Diagram (LAD) and the Statement List (STL) are used as presentations for S5. Existing S5 programs can be edited directly without im-/export. S5 for Windows® is compatible to the original Siemens programming unit. For automatic troubleshooting the S5 Doctor functions are integrated as well.
     

    S5 for Windows® provides the tools for creating, modifying, testing and documenting programs for programmable logic controllers (PLC). S5 for Windows® is designed for programming the Siemens PLC family SIMATIC S5 with STEP5. The Function Block Diagram (FBD), the Ladder Diagram (LAD) and the Statement List (STL) are used as presentations for S5. Existing S5 programs can be edited directly without im-/export. S5 for Windows® is compatible to the original Siemens programming unit. For automatic troubleshooting the S5 Doctor functions are integrated as well.  A comfortable editor to create and edit symbolic tables is integrated. Searching and replacing for any criteria as well as rewiring is possible. A syntax check is integrated. The new comfortable multiple segment editor for the creation of statement lists, function block diagrams and ladder diagrams allows the representation of complex functions too. Focus was set on the ease of use with the mouse and/or the keyboard. Cross references and/or the corresponding symbol files are shown with the correct addresses. In this window the symbol file can be edited simultaneously. The allocation of new addresses with syntax check is integrated. Statement lists are created with the comfort of integrated editor. The Windows clipboard can be used for program or configuration manipulations in any place. Statement lists can be altered into function block diagram or ladder diagrams, as far as they are displayable. The display of Function Block Diagrams and Ladder Diagrams in form of State Statement Lists is always possible.

    The OsciCAM® allows to analyze motion processes through synchronisation of previously recorded videos and process signals. Recorded videos can be shown synchronously to process signals and a recorded block status of the PLC with time stamp.

    With the Statusrecorder, dynamic procedures can be explored by subsequently analysis of the block status frame by frame. The Statusrecorder logs the block status and shows these with time stamp, permitting subsequent changing between the presentations STL, CSF and LAD. 

     

    With the Oscilloscope feature the diagnostic capabilities of the programming system are further enhanced. Dynamic processes can be monitored and analyzed in an integrated screen, in look and feel adapted from an oscilloscope front panel. Pointing to I/O signals with a virtual test probe is sufficient for monitoring multiple signals inside the virtual oscilloscope. Signal recording can be stopped at any time for further timing investigation of the machine fault. Besides watching I/O signals, also the state of local variables at a defined position of program execution can be watched, by simply pointing to the variable with the test probe in block status. Only the integration into the programming system S5 for Windows® makes this possible. The recorded data can also be saved for later investigation, for archiving purposes or to send the information via e-mail. 

     

    With S5 for Windows® multiple segments can be shown in the status display representations statement list, function block diagram and ladder diagram. The CPU status function provides information about interrupt stack, block stack and system data.

    S5 for Windows® allows calling the COM packages. Communication to a PLC can be established via an USB adaptor.

    The G5 for Windows® Step Sequence Programming (now included within S5 for Windows®) is a tool for easy programming sequential steps (sequencer control) within a STEP5 PLC program. A Step Sequence programmed in a Step Sequence Block (SB) is made out of steps and transitions. The transitions logic is used to enable the following step. The graphical G5 for Windows® Step Sequence Programming supports linear sequences, alternative branching, simultaneous branching and jumps. Steps are displayed with boxes. There is a differentiation between an initial step, a permanent step, and a selective step. The initial step is used for an unconditional start of the Step Sequence. The instructions of a permanent step will always be executed even if the step flag is not active. The instructions of a selective step will be jumped over if the step flag is not active.Transitions are displayed as lines. The following step will only be executed if the logic of a transition is true. With a simultaneous branch it is possible to branch up to eight (8) further steps. The graphical display of steps and transitions may include comments. With the exception of the initial step, each step may be assigned to a time. This could be a waiting time (delay timer) or a monitoring time (watch dog). The G5 for Windows®Graphical Step Sequence programming is compatible to the SIEMENS GRAPH5 and GRAPH5/II PLC programming package and therefore it also needs the standard SIEMENS Function and Step Blocks (FB70/71 - SB0, FB72 - SB2, FB73 - SB3). Simultaneously to the actual Step Sequence the logic of the selected Step or Transition is displayed in a separate window. This logic may be displayed and edited inLadder logic (LAD), Control System Flowchart (CSF), or Statement List (STL). The size of the logic window may be adjusted. The corresponding Symbolic Library may also be displayed and edited at the same time. The size of the step boxes is adjustable to the size (number of characters per line, number of lines) of the used comments. The status display has the same layout as the editor window. Active and corrupted steps are specially indicated.

      

    S7 programing

    In order to program the Siemens PLC-control series S7-300 and S7-400 efficiently and comfortably, IBHsoftec provides the software S7 for Windows®. This software can be combined with S5 for Windows® or runs stand alone. With S7 for Windows® the entire Simatic S7-300 and S7-400 PLC-control series can be programmed. The complete S7 instruction set is im-plemented in the presentations Statement List (STL), Function Block Diagram (SFC) and Ladder Diagram (LAD).

    Of course all online-functions are implemented. The new operational concept of version 7 has been developed on the basis of the newest cognitions in operator guidance. Block lists and symbolic tables for example can be arranged freely, they can be drawn in any order from the main window onto a second screen and can be faded out automatically from the main window, in order to gain more space on the screen. The presentation of the module parameters has been adjusted as well.

    With S7 for Windows® the entire S7 instruction set can be shown in the representation STL (Statement List) in status view. Thestatus operation is also possible in the representations Function Block Diagram (SFC) and Ladder Diagram (LAD). Furthermore variable views and symbolic tables are integrated in the status window. All installed interfaces capable of connecting to a PLC are displayed in the online view.

    All STEP7-projects can be edited directly without im-/export. Archived STEP7-projects can be opened directly. All write accesses on the PLC can be prevented with a password protection. Signals (operands) traceability is possible. Cross-reference over complete I/O modules and hardware or module diagnostics is also possible. The print preview and the forcing of operands are implemented as well. The conversion from S5- to S7-programs has been optimized. Saving of complete S7-projects on a memory-card is also possible (CPU dependent).

    Version 7 contains S7-Simulation and the comfortable block comparison (BlockDiff). The functions of S7 Doctor for automated troubleshooting are integrated as well. The S7 for Windows allows a fully automated debugging in the running PLC program. Compared to the classical debugging the S7 for Windows performs all the tasks required during debugging and returns the reason for the stop in plain text. In contrast to conventional diagnostic tools, no special adaptation of the PLC program is necessary.

    The OsciCAM® allows to analyze motion processes through synchronisation of previously recorded videos and process signals. Recorded videos can be shown synchronously to process signals and a recorded block status of the PLC with time stamp.

     

    With the Statusrecorder, dynamic procedures can be explored by subsequently analysis of the block status frame by frame. The Statusrecorder logs the block status and shows these with time stamp, permitting subsequent changing between the presentations STL, CSF and LAD. 

     

    With the Oscilloscope feature the diagnostic capabilities of the programming system are further enhanced. Dynamic processes can be monitored and analyzed in an integrated screen, in look and feel adapted from an oscilloscope front panel. Pointing to I/O signals with a virtual test probe is sufficient for monitoring multiple signals inside the virtual oscilloscope. Signal recording can be stopped at any time for further timing investigation of the machine fault. Besides watching I/O signals, also the state of local variables at a defined position of program execution can be watched, by simply pointing to the variable with the test probe in block status. Only the integration into the programming system S7 for Windows® makes this possible. The recorded data can also be saved for later investigation, for archiving purposes or to send the information via e-mail. 

     

    The hardware configuration allows the parametrizing of modules, the allocation of addresses and the configuration of a PROFIBUS. By clicking on the module in the configuration, a dialogue opens, which allows to setup the module parameters. In the detail window of the module or CPU, executed changes are marked clearly, in order to avoid unintentional changes before saving.

    Besides the original Siemens PROFIBUS components, our hardware catalogue contains PROFIBUS components from other manufacturers, which are compatible to Siemens. The hardware catalogue can be extended with files in GSD-format. The hardware configuration of existing STEP7 projects can be read and edited. Besides offline-creation of hardware configurations, it is also possible to read and edit existing configurations from a PLC. For quick debugging, module diagnostic functions are integrated. Thehardware catalogue is updated constantly for the latest modules. These updates are freely available via internet.

  • مشخصات

     محتواي ديسك  نرم افزار
     شركت توليد كننده IBHsoftech
     سال توليد  2017
     نسخه 7.3.3.5041
     سيستم عامل قابل پشتيباني Windows 10/ Windows 8/ Windows 7/ Windows Vista 
     معماري سيستم عامل قابل پشتيباني  32bit / 64bit
     روش فعال سازي  لايسنس ساز
     تعداد ديسك  1
     نوع ديسك  DVD

     

قیمت: 2,850,000 ریال
تعداد:
دیدگاه ها
نوشتن دیدگاه برای این محصول!
نام
ایمیل
متن دیدگاه
امتیاز برای محصول

برخی از مشتریان ما

تماس با ما

  • تهران، بلوار اشرفی اصفهانی، باغ فیض، خیابان خجسته پور، خیابان امیر ابراهیم، مجتمع الزهرا، بلوک شقایق E ، طبقه هفتم، واحد 25
  • از پذیرش مراجعین بصورت حضوری بدون هماهنگی قبلی معذوریم!
  • ساعات پشتیبانی تلفنی به شرح زیر می باشد، لطفاً در غیر این ساعات از بخش پشتیبانی سایت استفاده نمایید. در این روش حداکثر زمان پاسخگویی به شما 2 ساعت می باشد.

روزهای غیر تعطیل: از ساعت 8:30 تا 19:00

روزهای تعطیل: از ساعت 10:00 تا 17:00

  • (خط ویژه )91029360 21 98+
  • 44462808 21 98+
  • 89786561 21 98+
  • 30001220515673
  • این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید
  • پشتیبانی و مشاوره فنی : 09125156730

تاییدیه مـراجع ذیصـلاح

ارسال سریع پیام

  پیام ارسال نشد!   پیام شما با موفقیت ارسال شد!
Top